ANTENNAS / Multisector

Multi-Sector Diversity 6

AM6

The AM is one of SVP Aerospace´s multisector antennas. It’s a very compact, robust and easy-to-install solution for applications where hemispherical coverage with high gain is needed.

The AM antenna is comprised of 5 vertical linear polarization sector panel antennas to offer an omnidirectional coverage. It also has an up antenna which allows hemispherical coverage.

The AM antenna integrates the bandpass filters and the down-converters. At the TNC connector outputs it offers the received signal filtered, amplified and converted to the UHF band.

Advantages:
• Reception of signals coming from in-motion vehicles.
• It offers 360º coverage in the receiver site. There is no need to steer the antennas.
• Reception of signals transmitted from aircrafts (helicopters/airplanes) to the ground.

This antenna has been designed to be used in the receiver site in airborne links in diversity-6 mode; the up-down antenna allows the reception of the signal coming from the helicopter even if it is in the vertical direction.

SPECIFICATIONS

AM Multisector Antenna

Frequency bands 2.200 to 2.400 MHz
2.500 to 2.700 MHz
4.400 to 5.000 MHz
5.000 to 5.500 MHz
5.500 to 6.000 MHz
6.420 to 7.170 MHz
6.800 to 7.500 MHz
Gain Panel antennas: 5 x 16dBi
Hemihespherical: 1 x 2dBiC (optional)
Elevation beamwidth
Tilt Adjust +3º to -3º per panel
Azimuth beamwidth
75º (x5)
Number of dipoles/sector
8
Connectors 6 x TNC 50 Ohm
Down-Converters 6 units included
LO Frequency Selectable by internal switch
Filters 6 x 7 Cells Bandapass filters
Conversion Gain Selectable 20 and 30dB
Noise Figure < 1.5 dB
Phase noise -98 dBc/Hz @ 10 kHz
Power supply 7 to 36 V